Service Call Conditions
D129/D130 6-28 SM
- -
[24] Data read error: Communication suspended error
[25] Data read error: Buffer full error
[26] Data read error: No error code
[27] Device detection error: ID error
[28] Device detection error: Channel error
[29] Device detection error: Device error
[30] Device detection error: Communication failed error
[31] Device detection error: Communication time over error
[32] Device detection error: Communication suspended error
[33] Device detection error: Buffer full error
[34] Device detection error: No error code
Retry of EEPROM communication fails three times after the machine has
detected the EEPROM error.
Caused by noise
670 D
Engine startup error
The BCU fails to respond with the prescribed time when the machine is
turned on.
Connections between BCU and controller board are loose,
disconnected, or damaged
1. Replace the BCU
2. Replace the controller board
To Next Page
Loading...
