Ricoh D129 - Page 616

System SP Table-1
D129/D130 3-12 SM Appendix
Adjusts the number of web motor rotations at the re-load state.
010
Web Motor Interval: Pre-idle [0 to 30 / 5 / 1 sec]
Adjusts the motor waiting time after the fusing motor idling.
011
Web Motor Rotation: Pre-idle [0 to 10 / 2 / 1 times]
Adjusts the number of web motor rotations at the fusing idling state.
1903 Cleaning Web Setting
001
Total Paper Counter [0 to 999999999 / 0 / 1 sec]
Displays the total paper feeding time.
002
Total Web Motor Drive Time [0 to 999999999 / 0 / 1 sec]
Displays the total time of web motor rotation.
1907 Paper Feed Timing Adj. (DFU)
001 Feed Solenoid ON: Plain
[-10 to 40 / 0 / 2.5 mm]
002 Feed Solenoid ON: Thick
003 Feed Solenoid OFF: Plain
[-10 to 10 / 0 / 1 mm]
004 Feed Solenoid OFF: Thick
005 Feed Clutch ON: Plain
006 Feed Clutch ON: Thick
007 Stop Position before Inverter
008 Stop Position after Inverter
009 Re-Feed Stop Position
010 By-pass Solenoid OFF [0 to 40 / 0 / 1 mm]
011 By-pass Solenoid ON [0 to 1 / 1 / 1 mm]
012 By-pass Feed Clutch ON [-10 to 10 / 0 / 1 mm]