System SP Table-1
D129/D130 3-14 SM Appendix
1916
CPM Down Setting
When this machine gets a sequence of coping/printing jobs, the machine
uses CPM down mode to prevent the fusing temperature from becoming too
low.
001 Temp.: Plain
Adjusts the thresholds for each
environmental condition (between Low
and Medium).
[10 to 23 / 17 / 1 deg]
002 Temp.: M-Thick
003 Temp.: Thick 1
004 Temp.: Thick 2
005 Temp.: Thin
006 ON/OFF: Low: Plain
Turns on or off the CPM down setting
for each paper type and ambient
temperature.
[0 to 1 / 0 / 1 ]
0= Off, 1= On
007 ON/OFF: Low: M-Thick
008 ON/OFF: Low: Thick 1
009 ON/OFF: Low: Thick 2
010 ON/OFF: Low: Thin
011 ON/OFF: Medium: Plain
012 ON/OFF: Medium: M-Thick
013 ON/OFF: Medium:: Thick 1
014 ON/OFF: Medium: Thick 2
015 ON/OFF: Medium: Thin
016 Waiting Time: Low: Plain
Adjusts the threshold time to enter the
CPM down mode.
[0 to 180 / 60 / 1 sec]
The machine determines whether the
CPM down mode is activated or not
after the time specified with these SPs
has passed.
017 Waiting Time: Low: M-Thick
018 Waiting Time: Low: Thick 1
019 Waiting Time: Low: Thick 2
020 Waiting Time: Low: Thin
021 Waiting Time: Medium: Plain
To Next Page
Loading...
