3000/2000-sheet (Booklet) Finisher (D636/D637)
D129/D130 2-44 SM
7. Attach the rear joint bracket [A] (
x 2; M4 x 14).
8. Attach the front joint bracket [B] and the holder bracket [C] (
x 2; M4 x 14).
Holder bracket [C] must be placed outside the front joint bracket [B]. This bracket
is provided with the Bridge Unit (D634).
9. Pull the lock lever [A] (
x 1).
10. Slowly push the finisher to the left side of the machine, keeping its front door open until the
brackets [B] [C] go into their slots.
11. Push the lock lever [A], and then secure it (
x 1).
12. Close the front door of the finisher.
13. Connect the finisher connector [D] to the machine.
To Next Page
Loading...
