1000-sheet Finisher (D588)
D129/D130 2-56 SM
Use the screw removed in step 1 and the screw from the accessory box.
4. Open the front door [B]. Then pull the locking lever [C].
5. Align the finisher on the joint brackets, and lock it in place by pushing the locking lever.
6. Secure the locking lever (
x 1; knob M3 x 8) and close the front door.
7. Install the copy tray [D] (
x 1; knob M4 x 10).
8. Connect the finisher cable [E] to the main machine as shown above.
9. Attach the staple position decal [A] to the ARDF as shown.
10. Turn on the main power switch and check the finisher operation.
To Next Page
Loading...
