Hard Disk Drive Option (D158/D159 only)
D158/D159/D160/D161/D170 2-76 SM
2.14.4 HDD ENCRYPTION
Do the following procedure if a customer wants to use this function.
1. Do SP5-878-2 (Option Setup - Encryption Option) and touch [EXECUTE]
2. Go out of the SP mode, turn off the operation switch, then turn off the main power switch.
3. Turn the machine power on.
4. Push [User Tools] and select System Setting > Administrator Tools > Machine Data
Encryption Setting.
5. Press [Encrypt].
6. Select the data to be carried over to the hard disk and not to be reset
To carry all of the data over to the hard disk, select [All data].To carry over only the machine
setting data, select [File System Data Only]. To reset all of the data, select [Format All Data].
7. Press the [Start] Key.
The encryption key for backup data is printed.
To Next Page
Loading...
