PCU Section
D158/D159/D160/D161/D170 4-52 SM
4.7.3 OPC DRUM
1. PCU ( p.4-50)
2. Front side piece [A] (
x 1)
3. Rear side piece [B] (
x 2, 1 coupling)
4. Separate the drum section [C] from the developer section [D].
To ensure that the left-side gears line up, keep the drum cover [E] closed when
reinserting the front side piece.
5. Pry out the drum retaining clip [F].
Install the clip in the same orientation (with the lip facing away from the drum shaft)
when you reassemble.
6. OPC drum [G]
7. When reassembling, adjust the image quality (
p.4-56 "After Replacement or Adjustment").
To Next Page
Loading...
