Ricoh D158 - Anti-Condensation Heater Installation; Component Check; Installation Procedure

Anti-condensation Heater Installation
D158/D159/D160/D161/D170 2-44 SM
2.10 ANTI-CONDENSATION HEATER INSTALLATION
2.10.1 COMPONENT CHECK
Check the quantity and condition of the components against the following list.
No. Description Q’ty
1
Anti-condensation Heater (P/N – B2291688 for EU
and AA)
1
1
Anti-condensation Heater (P/N – B2291687 for
NA)
1
2 Relay Harness (P/N – D1595227) 1
3 Bracket (P/N – D1491835) 1
4 Screw (P/N – 03530030) 2
2.10.2 INSTALLATION PROCEDURE
 Unplug the machine power cord before starting the following procedure.
1. Rear cover (
p.4-4)
2. Platen cover, or ARDF (if installed)
3. Exposure glass/DF exposure glass (
p.4-20)
4. Install the bracket [A].
⇒
Rev. 03/10/2014