Ricoh D158 - Cleaning Blade

PCU Section
D158/D159/D160/D161/D170 4-54 SM
4.7.5 CLEANING BLADE
1. Drum charge roller ( p.4-53 "Charge Roller and Cleaning Brush")
2. Cleaning blade [B] (
x 2)
3. When reassembling, adjust the image quality (
p.4-56 "After Replacement or Adjustment").
 Reassembling
 Apply toner to the edge of the new cleaning blade when you replace the cleaning blade.
This prevents possible damage to the OPC drum and blade.
1. After installing the cleaning blade, remove some of the toner from the old blade with
your finger.
2. Apply the toner to the edge [A] of the new cleaning blade. Make sure to apply the
toner evenly along full length of the new cleaning blade.