TYPE M1
(D702)
5.2 IFAX SPECIFICATIONS
Connectivity:
Local area network
Ethernet 100base-Tx/10base-T
Gigabit Ethernet 1000 Base-T
IEEE802.11a/g, g (wireless LAN),
Resolution:
200 × 100 dpi (Standard resolution), 200 × 200 dpi (Detail
resolution)
Transmission
Time:
1 s (through a LAN to the server)
Condition: ITU-T #1 test document (Selerexe Letter)
MTF correction: OFF
TTI: None
Resolution: 200 x 100 dpi
Communication speed: 10 Mbps
Correspondent device: E-mail server
Line conditions: No terminal access
Document Size:
Maximum Original Size: A3/DLT.
To use B4 and A3 width, IFAX SW00 Bit 1 (B4) and/or Bit
2 (A3) must be set to “1”.
E-mail File
Format:
Single/multi-part
MIME conversion
Image: TIFF-F (MH, MR, MMR)
Protocol:
Transmission:
SMTP, TCP/IP
Reception:
POP3, SMTP, IMAP4, TCP/IP
Data Rate:
1000 Mbps (1000 Base-T)
100 Mbps (100 base-Tx)
10 Mbps (10 base-T)
Authentication
Method:
SMTP-AUTH
POP before SMTP
A-POP
Remark: The machine must be set up as an e-mail client before installation.
Any client PCs connected to the machine through a LAN must also
be e-mail clients, or some features will not work (e.g. Autorouting).
To Next Page
Loading...
