Ricoh D158 - Installation Procedure; Sd Card for Netware Printing (D158;D159)

Controller Options
D158/D159/D160/D161/D170 2-93 SM
Installation
3. Plug in and turn on the main power switch.
4. Turn the main switch off.
5. Attach the card slot cover, and then turn on the machine (
x 1).
6. Make sure that the machine can recognize the option (
p.2-112 "Check All Connections").
2.15.8 SD CARD FOR NETWARE PRINTING (D158/D159)
Installation Procedure
 Unplug the main machine power cord before you do the following procedure.
1. Remove the card slot cover [A] (
x 1).
2. Insert the SD card (Netware Printing) in SD slot 1 [B].
 If slot 1 [B] is in use, move the application program to another SD card with
SP5-873-001.
3. Plug in, and turn the main switch on.
4. Turn the main switch off.
5. Attach the card slot cover, and then turn the main switch on (
x 1).
6. Make sure that the machine can recognize the option (
p.2-112 "Check All Connections").