Ricoh D158 - File Names of the Saved SMC Lists

Using SP Modes
D158/D159/D160/D161/D170 6-40 SM
11. Wait for 2 to 3 minutes until “Completed” is shown.
 The SMC list saving may take from 2 to 3 minutes to complete.
 Press [CANCEL] to abort executing.
12. Press [Exit] to exit from SP mode.
File Names of the Saved SMC Lists
The SMC list data saved on the SD card will be named automatically. The file naming rules are as
follows.
Example:
A:
Machine serial number (fixed for each machine)
B:
SP number saved in this file.
The first four digits (5992) in this part are fixed. The other one or two digits are the detail SP
number(s). In this case, it is one digit. Therefore, this file is for SP5-992-001 (All data list). See the
upper SP table for the correspondence between SP detail numbers and the contents.
C:
File creation date
Year/Month/Day (“Zero” will be omitted if each is one digit.)
D:
File creation time
Hour/Minute/Second (“Zero” will be omitted if each is one digit.)
E:
File Extension CSV (Comma Separated Value)
This part is fixed.
 A folder named with the machine serial number will be created on the SD card when this
function is executed.