Ricoh D158 - Installation Procedure

One-Bin Tray Installation
D158/D159/D160/D161/D170 2-39 SM
Installation
2.9.2 INSTALLATION PROCEDURE
 Unplug the copier power cord before starting the following procedure.
 Before installation, see Technical Service Bulletin D158/D159/D160/D161/D170 – 001
REROUTE HARNESS BEFORE INSTALLING THE 1-BIN TRAY (BN2010).
1. Strip all tapes on the 1-bin tray unit off.
2. Rear cover [A] (
x 9)
3. Inverter tray [A] (hook).
4. Inner cover [A] (
x 2)
 Keep the two screws that you removed in this step. Use them to attach the accessory
inner cover (step 9).
⇒
Rev. 3/31/2014