Ricoh D158 - Charge Roller and Cleaning Brush

PCU Section
D158/D159/D160/D161/D170 4-53 SM
Replacement
and
Adjustment
4.7.4 CHARGE ROLLER AND CLEANING BRUSH
1. OPC Drum ( p.4-52)
2. Holding pin [A]
3. Stepped screw [B]
4. Charge roller [C] and cleaning brush [D] (with the holders and springs)
 Turn the gear [E] (as necessary) so that the rear holder [F] comes out.
5. When reassembling, adjust the image quality ( p.4-56 "After Replacement or Adjustment").