Ricoh D158 - Counter Interface Unit; Component Check; Installation Procedure

Counter Interface Unit
D158/D159/D160/D161/D170 2-64 SM
2.12 COUNTER INTERFACE UNIT
2.12.1 COMPONENT CHECK
Check the quantity and condition of the components against the following list.
No. Description Q'ty
1 Key Counter Interface Board 1
2 Stud Stay 4
3 Wire Harness (For parallel) 1
4 Wire Harness (For serial) 1
2.12.2 INSTALLATION PROCEDURE
 Unplug the machine power cord before starting the following procedure.
1. Rear cover (
p.4-4)
2. Right rear cover (
p.4-13)
3. Cut off the part [A] of the right rear cover for the device cable.
4. Connect the accessory harness to the counter interface board (
x 1).