Copier Installation
D158/D159/D160/D161/D170 2-12 SM
18. Specify a language. This language is used for the operation panel.
19. Load the paper in the paper tray and make a full size copy, and make sure the side-to-side
and leading edge registrations are correct.
Selecting the Panel Display Language (for D158/D159)
To change the panel display language, it is necessary to register available languages in the User
Tools. Specify the settings according to the following procedure.
You can select one of these languages (the default is English): Japanese, English,
German, French, Italian, Dutch, Swedish, Norwegian, Danish, Spanish, Finnish,
Portuguese, Czech, Polish, Hungarian, Simplified Chinese, Russian, Greek, Catalan,
Turkish, or Brazilian Portuguese.
You do not have to do this procedure if you use English. Do this procedure if you want to
use a different language.
1. Turn on the power switch of the machine.
2. Press the "User Tools/Counter" key.
3. Press "Administrator Tools" in "System Settings".
4. Press "Select Switchable Languages".
5. Using the language button displayed on the User Tools screen, select the required language
(this will then be selectable at any time with a toggle setting), and then press "OK".
Only languages available for the machine are displayed.
At least one language must be selected.
6. Return to the User Tools menu, and then keep pressing the language button until the
language you want to select appears.
The language selected in "Select Switchable Languages" becomes available for
selection by a toggle setting.
To Next Page
Loading...
