Controller Options
D158/D159/D160/D161/D170 2-94 SM
2.15.9 BLUETOOTH INTERFACE UNIT (D158/D159)
Installation Procedure
Unplug the main machine power cord before you do the following procedure.
Do not remove the Bluetooth unit while the power of the machine is on.
You can only install one of the following network interfaces at a time: (IEEE a/b/g (Wireless LAN),
Bluetooth).
1. Insert the Bluetooth Interface adapter into the USB connector [A].
2. Plug in, and turn the main switch on.
3. Make sure that the machine can recognize the option (
p.2-112 "Check All Connections").
The Bluetooth interface unit and the IC card can not be used simultaneously.
To Next Page
Loading...
