Ricoh D158 - Ieee 1284 Interface Board (D158;D159); Installation Procedure

Controller Options
D158/D159/D160/D161/D170 2-99 SM
Installation
2.15.11 IEEE 1284 INTERFACE BOARD (D158/D159)
Installation Procedure
 Unplug the main machine power cord before you do the following procedure.
You can only install one of the following network interfaces at a time: (IEEE 802.11 a/b/g (Wireless
LAN), IEEE1284)
1. Remove the slot cover [A] (
x 2).
2. Install the IEEE 1284 I/F board [B] into the board slot and then fasten it with screws.
3. Make sure that the machine can recognize the option ( p.2-112 "Check All Connections").