Ricoh D158 - One-Tray Paper Tray Unit Installation; Component Check; Installation Procedure

One-tray Paper Tray Unit Installation
D158/D159/D160/D161/D170 2-34 SM
2.8 ONE-TRAY PAPER TRAY UNIT INSTALLATION
2.8.1 COMPONENT CHECK
Check the quantity and condition of the accessories against the following list.
No. Description Q’ty
1 Paper Feed Unit 1
2 Paper Tray Number Decal 1
3 Securing bracket 2
4 Screw 4
- Installation Procedure 1
2.8.2 INSTALLATION PROCEDURE
 Turn off the main switch of the copier and unplug the power cord before you start the
installation procedure.
 You need two or more persons to lift the copier. The copier is highly unstable when lifted
by one person, and may cause human injury or property damage.
 Do not lift the copier with the paper feed unit installed. The handle and grips may be
damaged.
1. All tape on the paper feed unit.
2. Rear Cover [A] (
x 9)