Ricoh D158 - Serial Number Input (Sp 5811) (D158;D159)

Using SP Modes
D158/D159/D160/D161/D170 6-31 SM
Service
Tables
Num. Component (D158/D159)
047 P Sensor
048 Anti-static LED
049 Polygon Motor: High
050 Polygon Motor: Low
051 LD On
055 By-pass CL
056 By-pass Tray CL
071 Bank: Motor
072 Bank: Feed Clutch 1
073 Bank: Feed Clutch 2
074 Bank: Trans Clutch
202 Scanner Lamp
6.4.6 SERIAL NUMBER INPUT (SP 5811) (D158/D159)
- Specifying Characters -
SP5-811-004 specifies the serial number.
A serial number consists of 11 characters. You can change each character by pressing one of the
first 11 keys on the numeric keypad (
, , , ... , , ).
For example, when you press the
key, the first character of the serial number changes as
follows:
0
1 2 ... 8 9 A B ... X Y Z.
When you press the
key, the second character changes likewise.
You can specify a digit ("0" to "9") or a capital letter ("A" to "Z") for the first four characters of a
serial number, and you can specify a digit in the other seven characters (not capital letters).