Ricoh D158 - Ardf Image Adjustment

Copy Adjustments Printing/Scanning
D158/D159/D160/D161/D170 4-111 SM
Replacement
and
Adjustment
4.14.3 ARDF IMAGE ADJUSTMENT
A: Leading edge registration
B: Side-to-side registration
 Make a temporary test chart as shown above, using A3/11" x 17" paper.
1. Place the temporary test chart on the ARDF and make a copy from one of the feed stations.
2. Check the registrations, and adjust as necessary with the appropriate SP modes, as follows.
SP mode
ADF Adjustment - Side to Side Registration SP6-006-001 (D160/D161/D170)
ADF Adjustment - Leading Registration SP6-006-002 (D160/D161/D170)
ADF Adjustment - Magnification SP6-006-005 (D160/D161/D170)
ADF Adjustment - Side to Side Registration: Front SP6-006-001 (D158/D159)
ADF Adjustment - Side to Side Registration: Rear SP6-006-002 (D158/D159)
ADF Adjustment - Leading Edge Registration SP6-006-003 (D158/D159)
DF Magnification Adjustment SP6-017-001 (D158/D159)