Controller Options
D158/D159/D160/D161/D170 2-106 SM
Fax Settings
Initializing the Fax unit
When you press the Fax key for the first time after installation, the error "SRAM problem occurred
/ SRAM was formatted" will show on the LCD for initializing the program of the fax unit. Turn the
main power switch off/on to clear the error display.
If another error occurs after initialization, this can be a functional problem.
1. Select fax SP1-101-016 and specify the country code.
2. Select fax SP3-101-001 and specify the service station if necessary.
2.15.13 MEMORY UNIT (D158/D159)
Installation Procedure
Unplug the main machine power cord before you do the following procedure.
1. Rear cover (
p.4-4)
2. Replace the 1 GB memory unit in the slot [A] on the controller board with the optional 1.5 GB
memory unit.
3. Reassemble the machine.
To Next Page
Loading...
