9. Replace the screws [A] with screws that have a lock washer.
10. Install the harness of the heater and connect it to the PSU. (
p.2-61 "Installing the Harness
of the Heater")
2.11.5 INSTALLING THE HARNESS OF THE HEATER
Unplug the machine power cord before starting the following procedure.
No. Description Q’ty
1 Harness for One-Tray Model 1
2 Relay Harness 1
3 Clamp 2
4 Harness for Two-Tray Model 1
1. Connect the harness [A] to the PSU (
x 1, x 4).
To Next Page
Loading...
