Copy Adjustments Printing/Scanning
D158/D159/D160/D161/D170 4-106 SM
Tray SP mode Specification
By-pass feed: Mid Thick SP1-001-008
By-pass feed: Thick SP1-001-009
Duplex: Plain SP1-001-013
Duplex: Mid Thick SP1-001-014
Duplex: Thick SP1-001-015
By-pass feed SP1-002-001
Tray Main 1 SP1-002-002
Tray Main 2 SP1-002-003
Tray Bank 1 SP1-002-004
Tray Bank 2 SP1-002-005
Duplex SP1-002-006
A: Leading Edge Registration
B: Side-to-side Registration
- Blank Margin -
If the leading edge or side-to-side registration cannot be adjusted to within the
specification, then adjust the leading-edge blank margin or the left-side blank margin.
1. Check the trailing edge and right side edge blank margins, and adjust them using the
following SP modes.
<D160/D161/D170>
To Next Page
Loading...
