Main SP Tables-1
D158/D159/D160/D161/D170 3-16 SM Appendix
002
2nd Optional
(D160/D161/D170)
*ENG
[-2 to 2 / 0 / 1 / step]
Adjusts the paper feeding pressure for 2nd optional tray.
-2 - - - - - - - - - - - - - - - - - - 0 - - - - - - - - - - - - - - - - - - +2
Low Pewssure High Pressure
(uses when double feed) (uses when non-paper feed)
Controls 100ms by 1 step.
015 Junction Gate SOL1:ON *ENG
[-10 to 10 / 0 / 1mm / step]
017 Junction Gate SOL1:OFF *ENG
[-10 to 10 / 0 / 1mm / step]
1911
[By-pass Envelope]
0 = Disabled / 1= Enabled
The program dedicated to envelope printing runs when you enable this
program (SP 1911 1) and you select "Thick Paper" as the paper type of the
by-pass tray (System Settings > Tray Paper Settings > Paper Type: Bypass
Tray).
001 By-Pass Envelope *ENG
[0 or 1 / 0 / 1 / step]
1950
[Fan Cooling Time Set] (D158/D159)
Adjust the rotation time for each fan motor after a job end.
001
To Next Page
Loading...
