Ricoh D158 - Page 477

Main SP Tables-2
SM Appendix 3-19 D158/D159/D160/D161/D170
Appendix:
Service
Program
Mode Tables
2005
[Charge Bias Correction] (D158/D159)
[CR Bias Vsdp] (D160/D161/D170)
001
Vsdp Min
(Min)
*ENG
[0 to 100 / 90 / 1 % / step]
Sets the minimum value of Vsdp.
002
Vsdp Max
(Max)
*ENG
[0 to 100 / 95 / 1 % / step]
Sets the maximum value of Vsdp.
003
Revision Step
(Step)
*ENG
[0 to 200 / 50 / 10 vol / step]
2101
[Erase Margin Adj] (D160/D161D170)
Adjusts the width of the erased area of the each edges.
001 Leading Edge *ENG
[0.0 to 90.0 / 20.0 / 0.1 mm / step]
002 Trailing Edge *ENG
[0.0 to 90.0 / 30.0 / 0.1 mm / step]
003 Left Side *ENG
[0.0 to 90.0 / 20.0 / 0.1 mm / step]
004 Right Side *ENG
[0.0 to 90.0 / 20.0 / 0.1 mm / step]
2102
[Main Scan Mag. Adjustment] (D158/D159)
Adjust the image scale for main scan magnification.
 A "+" setting stretches the image.
 A “-” setting compresses the image.
001 - *ENG
[-0.5 to 0.5 / 0.0 / 0.1 % / step]