Ricoh D158 - Page 482

Main SP Tables-2
D158/D159/D160/D161/D170 3-24 SM Appendix
2220
[Process Data Dilay] (D158/D159)
[ID Error Analysis] (D160/D161/D170)
Displays:
a) Vt: the current TD sensor output value and
b) Vref: the target TD output value Vts (SP2-926) + correction for ID sensor
output.
The TD sensor output value changes every copy. If a > b, toner is supplied to
the development unit.
001 Vsp *ENG
[0.00 to 9.99 / 0.00 / 0.01 vol / step]
002 Vsg *ENG
[0.00 to 9.99 / 0.00 / 0.01 vol / step]
003 Vsdp *ENG
[0.00 to 9.99 / 0.00 / 0.01 vol / step]
004 Vt *ENG
[0.00 to 9.99 / 0.00 / 0.01 vol / step]
005 Vtref *ENG
[0.00 to 9.99 / 2.5 / 0.01 vol / step]
2224
[Copies After Toner Near End] (D158/D159)
Current counter after near end.
001 Counter *ENG
[0 to 999 / 0 / 1 sheet / step]
2301
[Transfer Current Adjust] (D158/D159)
-
001 Thin:1side:Image Area *ENG
[-8 to 8 / 0 / 1 uA / step]
002 Thin:1side:Lead Edge *ENG
[-8 to 8 / 0 / 1 uA / step]
003 Thin:1side:Trail Edge *ENG
[-8 to 8 / 0 / 1 uA / step]
004 Thin:2side:Image Area *ENG
[-8 to 8 / 0 / 1 uA / step]
005 Thin:2side:Lead Edge *ENG
[-8 to 8 / 0 / 1 uA / step]
006 Thin:2side:Trail Edge *ENG
[-8 to 8 / 0 / 1 uA / step]
007 Plain:1side:Image Area *ENG
[-8 to 8 / 0 / 1 uA / step]