Ricoh D158 - Page 495

Main SP Tables-2
SM Appendix 3-37 D158/D159/D160/D161/D170
Appendix:
Service
Program
Mode Tables
2996
[Transfer Roller Cleaning] (D158/D159)
[T Roller Cleaning] (D160/D161/D170)
001
Function Select
(T Roller Cleaning)
*ENG
[0 or 1 / 0 / 1 / step]
0: Off
1: On
Selects the transfer roller cleaning before printing On / Off.
002
Interval *ENG
[0 to 100 / 50 / 1 / step]
Executes the transfer roller cleaning after job end when the counter
(SP2-996-003) reached this SP.
003
Counter ENG
[0 to 255 / 0 / 1 sheet / step]
Counter for executing SP2-996-002. Counts up when registration is resumed.
2998 [PCU Reverse Rotation Time] (D158/D159)
001
Wait Time *ENG
[240 to 999 / 300 / 1 ms / step]
Sets the time until the reverse rotation starts after the main motor stopped.
002
Reverse Time *ENG
[0 to 99 / 60 / 1 ms / step]
Sets the reverse rotation time.
2998 [Main Mag-print] (D160/D161/D170)
001
Main Mag-print *ENG
[-5.0 to 5.0 / 0.0 / 0.1 % / step]
Adjusts the magnification for the main scanning direction.
2999 [Main Motor Adj] (D160/D161/D170)
001 Wait Time *ENG
[-5.0 to 5.0 / 0.0 / 0.1 % / step]
002 Reverse Time *ENG
[0 to 99 / 60 / 1 ms / step]