Main SP Tables-5
D158/D159/D160/D161/D170 3-80 SM Appendix
5024
[mm/inch Display Selection] (D158/159)
Selects the unit of measurement.
After selection, turn the main power switch off and on.
001 0:mm 1:inch *CTL
[0 or 1 / 0 / 1 / step]
0: mm (Europe/Asia)
1: inch (North America)
5045
[Accounting Counter] (D158/159)
[Dsply-Counter] (D160/D161/D170)
Selects the counting method to either developments or prints.
The counting method can be changed only once, regardless of
whether the counter value is negative or positive.
001 Counter Method *CTL
[0 or 1 / 0 / 1 / step]
0: Developments
1: Prints
5047 [Paper Display] (D158/159)
001 - *CTL
[0 or 1 / - / 1 / step]
0: OFF, 1:ON
5055
[Display IP Address] (D158/159)
Display or does not display the IP address on the operation panel.
001 Display IP Address *CTL
[0 or 1 / 0 / 1/step]
0: OFF, 1: ON
5062
[Parts PM Display Setting] (D158/159)
Display or does not display the PM part yield on the LCD.
001 - *CTL
[0 or 1 / 0 / 1/step]
0: No display, 1: Display
To Next Page
Loading...
