ARDF Installation (for D158/D159)
D158/D159/D160/D161/D170 2-22 SM
16. Fasten the grounding wire [A] as shown. (
x1)
17. Plug in and turn on the main power switch of the machine, and then check the ARDF
operation.
18. Make a full size copy. Check that the registrations (side-to-side and leading edge) and image
skew are correct. If they are not, adjust the registrations and image skew (see p.4-111 "ARDF
Image Adjustment" in the "Replacements and Adjustments" chapter).
To Next Page
Loading...
