Main SP Tables-5
D158/D159/D160/D161/D170 3-84 SM Appendix
5118
[Disable Copying] (D158/159)
This program disables copying.
001 Disable Copying *CTL
[0 or 1 / 0 / 1/step]
0: Not disabled
1: Disabled
5120
[Mode Clear Opt. Counter Removal] (D158/159)
[Clr-OP Count Remv] (D160/D161/D170)
This program updates the information on the optional counter. When you install
or remove an optional counter, check the settings.
001 0:Yes 1:StandBy 2:No *CTL
[0 to 2 / 0 / 1/step]
0: Yes. (Always mode clear)
1: StandBy. (Mode clear before/after a
job)
2: No. (No mode clear)
5121
[Counter Up Timing]
This program specifies when the counter goes up. The settings refer to “paper
feed” and “paper exit” respectively.
001 0:Feed 1:Exit *CTL
[0 or 1 / 0 / 1/step]
0: Feed, 1: Exit
5126
[Set F-size Document] (D158/159)
[F-size Document] (D160/D161/D170)
Selects F size original setting.
001 - ENG
[0 to 2 / 0 / 1/step]
0: 8 1/2 x 13 (Foolscap)
1: 8 1/4 x 13 (Folio)
2: 8 x 13 (F)
To Next Page
Loading...
