Main SP Tables-5
D158/D159/D160/D161/D170 3-94 SM Appendix
5188
[Copy NvVersion] (D158/159)
Displays the version number of the NVRAM on the controller board.
001 Copy MvVersion *CTL
[- / - / -]
5191
[Power Setting] (D158/159)
Shifts to the power save mode or not.
001
Power Str *CTL
[0 or 1 / 1 / 1/step]
0: OFF, 1: ON
5193
[External Controller Info. Settings] (D158/159)
External controler settings.
001 - CTL
[0 to 10 / 0 / 1/step]
0: External Controller is not installed
1: EFI, 2: Ratio, 3: Egret
4: GJ, 5:Creo, 6: QX-100
7: Kurofune
8~10: Reserved
5195
[SC991 Operation Mode Setting] (D158/159)
Sets whether or not to display the icon.
002
SC Icon Display Setting *CTL
[0 or 1 / 0 / 1/step]
5199
[Paper Exit After Staple End] (D158/159)
This SP determines whether the machine can output paper if staple supply
runs out.
001
0: OFF, 1:ON CTL
[0 to 1 / 0 / 1]
0: OFF. Paper cannot exit if no
staples are available.
1: ON. Paper can exit with no staples.
To Next Page
Loading...
