Service
Program
Mode Tables
004
end data set *CTL
[0 to 0xffffffff / - / 1hex/step]
(Default)
NA: 0x11100200
EUR: 0x10500100
ASIA: 0x03100000
Other: 0x00000000
Specifies the end setting for the summer time mode.
There are 8 digits in this SP.
1st and 2nd digits: The month. [1 to 12]
3rd digit: The week of the month. [0 to 5]
4th digit: The day of the week. [0 to 7 = Sunday to Saturday]
5th and 6th digits: The hour. [00 to 23]
The 7th and 8 digits must be set to "00".
The digits are counted from the left.
Make sure that SP5-307-1 is set to "1".
5401 [Access Control] (D158/159)
103 Default Document ACL *CTL
[0 to 3 / 0 / 1/step]
0: Read Only
1: Edit
2: Edit/Delete
3: Full control
104
Authentication Time *CTL
[1 to 255 / 0 / 1sec/step]
0: 60 seconds
1 to 250 seconds
Specifies the timeout of the authentication.
162
ExtAuth Detail *CTL
[ - / 0x00 / 0x01/step]
Selects the log out type for the extend authentication device.
Bit 0: Log-out without an IC card
0: Not allowed (default)
1: Allowed
To Next Page
Loading...
