Ricoh D158 - Page 657

Main SP Tables-7
SM Appendix 3-199 D158/D159/D160/D161/D170
Appendix:
Service
Program
Mode Tables
018 PFU1: On *CTL
[0000 to 9999 / - / 1 / step]
019 PFU2:On *CTL
[0000 to 9999 / - / 1 / step]
020 PFU3: On *CTL
[0000 to 9999 / - / 1 / step]
024 Fusing Entrance: On *CTL
[0000 to 9999 / - / 1 / step]
032 Paper Exit On *CTL
[0000 to 9999 / - / 1 / step]
038 Duplex On *CTL
Paper stays on the duplex sensor.
[0000 to 9999 / - / 1 / step]
087 Resistration: Off *CTL
[0000 to 9999 / - / 1 / step]
096 Paper Exit: Off *CTL
[0000 to 9999 / - / 1 / step]
102 Duplex Off *CTL
Paper does not reach the duplex
sensor.
[0000 to 9999 / - / 1 / step]
7504
[Count-Each P Jam] (D160/D161/D170)
Displays the number of jams according to the location where jams were
detected.
001 At Power On *CTL
Paper is not fed at power on.
[000 to 999 / - / 1 / step]
010
Off-Regist NoFeed *CTL
[000 to 999 / - / 1 / step]
Paper does not reach the registration sensor (from a paper tray).
011
Off-1 Vertical SN *CTL
[000 to 999 / - / 1 / step]
Paper does not reach the relay sensor.
012
On-1 Vertical SN *CTL
[000 to 999 / - / 1 / step]
Paper is caught at the relay sensor.
021
Off-2 Vertical SN *CTL
[000 to 999 / - / 1 / step]
Paper does not reach the vertical transport sensor.