Printer SP Tables
D158/D159/D160/D161/D170 3-268 SM Appendix
bit 3
[PS] PS Criteria
Pattern 3
(2 to 4):
The larger
the pattern
number,
the greater
the
number of
criterion
used.
Pattern 4
includes
most PS
commands
Pattern1: A
small
number of
PS tags and
headers
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
bit 4
Increase max number of the stored jobs.
Disabled
(100)
Enabled
(750)
Changes the maximum number of jobs
that can be stored on the HDD.
The default (disabled) is 100. If this is enabled, the max. will be raised to
750.
bit 5 DFU
-
-
bit 6
Method for determining the image rotation
for the edge to bind on.
Disabled
Enabled
If enabled, the image rotation will be performed as they were in the
specifications of older models for the binding of pages of mixed
orientation jobs.
The old models are below:
- PCL: Pre-04A models
- PS/PDF/RPCS:Pre-05S models
To Next Page
Loading...
