6. Improving Throughput
Reducing the Waiting Time Prior to Printing
After receiving a print job, the machine usually stops to let the fusing temperature reach an appropriate
level for printing.
The waiting time for the fusing unit to cool down may be quite long, especially before printing on thin
paper. By decreasing the fusing temperature during standby, you can reduce the waiting time.
1. In the [Machine: Image Quality] group on the [Adjustment Settings for Skilled Operators]
menu, decrease the temperature by 10°C in [Fusing Temperature on Standby].
Decrease the value in [Temperature on Standby Mode] and [Temperature Before Performing a
Process] by 10°C.
• When printing on paper other than thin paper, we recommend leaving the above settings
unchanged.
107
To Next Page
Loading...
