Blister-like White Spots
White spots 0.3–0.5 mm (0.01–0.02 inches) in diameter surrounded by denser spots (blister-like white
spots) appear.
Cause:
This may occur if a solid image is printed on coated paper, if a solid image is printed during duplex
printing, or if printing is done at low temperature.
Solution:
If blister-like white spots appear, carry out the procedure in page 64 "Insufficient Toner Fusing".
Mottling
Mottling occurs in solid-filled areas.
Normal
Color Loss
39
To Next Page
Loading...
