Ricoh Pro C5200s Operating Instructions Troubleshooting: Tcru/Oru

Solution:
If vertical glossy lines appear, carry out the procedure in page 61 "Glossy Lines".
Insufficient Gloss
The image is not glossy enough.
Solution:
If the gloss of the image is not glossy enough, carry out the procedures in Procedure 1, "Changing the
fusing temperature" and Procedure 4, "Changing the process speed" of page 64 "Insufficient Toner
Fusing".
Gloss Problems
63

Ricoh Pro C5200s Specifications

General

Print Technology	Laser
Max Paper Size	330.2 x 487.7 mm
Monthly Duty Cycle	300, 000 pages
Print Speed	65 ppm
Resolution	1200 x 4800 dpi
Paper Input Capacity	8, 250 sheets
Paper Weight	52 to 360 gsm
Duplex Printing	Standard
Network Connectivity	Ethernet 10Base-T/100Base-TX/1000Base-T
Supported Media Sizes	A3, A4, A5, B4, B5
Supported Media Types	Plain, Recycled, Coated, Envelope
Warm-up Time	Less than 5 minutes