Rigol MSO2000A Series Programming Guide

RIGOL 2 Command System
2-120 MSO2000A/DS2000A Programming Guide
:LAN Commands
 :LAN:DHCP
 :LAN:AUToip
 :LAN:GATeway
 :LAN:DNS
 :LAN:MAC?
 :LAN:MANual
 :LAN:INITiate
 :LAN:IPADdress
 :LAN:SMASk
 :LAN:STATus?
 :LAN:VISA?
 :LAN:APPLy
:LAN:DHCP
Syntax
:LAN:DHCP <bool>
:LAN:DHCP?
Description
Enable or disable the DHCP configuration mode; or query the current status of the DHCP configuration
mode.
Parameter
Name Type Range Default
<bool> Bool {{0|OFF}|{1|ON}} 1|ON
Explanation
 When the three IP configuration types are all turned on, the priority of the parameter configuration
from high to low is “DHCP”, “Auto IP” and “Static IP”. The three IP configuration types cannot be all
turned off at the same time.
 When the DHCP configuration mode is valid, the DHCP server in the current network will assign the
network parameters (such as the IP address) for the oscilloscope.
Return Format
The query returns 0 or 1.

Rigol MSO2000A Series Specifications

General

Brand	Rigol
Model	MSO2000A Series
Category	Test Equipment
Language	English