Rigol MSO2000A Series Programming Guide

RIGOL 2 Command System
2-196 MSO2000A/DS2000A Programming Guide
:MEASure:PVRMs
Syntax 1
:MEASure:PVRMs <chan>
Description 1
Enable the RMS value measurement function within a single period of the specified channel.
Syntax 2
:MEASure:PVRMs? <chan>
Description 2
Enable the RMS value measurement function within a single period of the specified channel and return
the measurement result.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Explanation
The unit is determined by the unit selected for the source channel (refer to the
:CHANnel<n>:UNITs
command).
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:PVRMs CHANnel1
:MEASure:PVRMs? CHANnel1
You can use the following commands to query the statistic maximum, minimum, current value, average
and standard deviation of the RMS value measurement values within a single period of the specified
channel. Sending the following commands will enable the statistic function automatically.
 :MEASure:PVRMs:SMAXimum?
 :MEASure:PVRMs:SMINimum?
 :MEASure:PVRMs:SCURrent?
 :MEASure:PVRMs:SAVerage?
 :MEASure:PVRMs:SDEViation?

Rigol MSO2000A Series Specifications

General

Brand	Rigol
Model	MSO2000A Series
Category	Test Equipment
Language	English