Rigol MSO2000A Series Programming Guide

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-45
:CALCulate:SUB
 :CALCulate:SUB:SA
 :CALCulate:SUB:SB
 :CALCulate:SUB:INVert
 :CALCulate:SUB:VSCale
 :CALCulate:SUB:VOFFset
:CALCulate:SUB:SA
:CALCulate:SUB:SB
Syntax
:CALCulate:SUB:SA <source>
:CALCulate:SUB:SA?
:CALCulate:SUB:SB <source>
:CALCulate:SUB:SB?
Description
Set or query the channel source of signal source A or B of the subtraction operation.
Parameter
Name Type Range Default
<source> Discrete {CHANnel1|CHANnel2} CHANnel1
Return Format
The query returns CHAN1 or CHAN2.
:CALCulate:SUB:INVert
Syntax
:CALCulate:SUB:INVert <bool>
:CALCulate:SUB:INVert?
Description
Enable or disable the inverted display of the subtraction operation result; or query the current status of
the inverted display of the subtraction operation result.
Parameter
Name Type Range Default
<bool> Bool {{0|OFF}|{1|ON}} 0|OFF
Return Format
The query returns 0 or 1.

Rigol MSO2000A Series Specifications

General

Brand	Rigol
Model	MSO2000A Series
Category	Test Equipment
Language	English