Rigol MSO2000A Series

RIGOL 2 Command System
2-68 MSO2000A/DS2000A Programming Guide
:CHANnel<n>:INVert
Syntax
:CHANnel<n>:INVert <bool>
:CHANnel<n>:INVert?
Description
Enable or disable the inverted display of the specified analog channel; or query the current status of the
inverted display of the specified analog channel.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<bool> Bool {{0|OFF}|{1|ON}} 0|OFF
Return Format
The query returns 0 or 1.
:CHANnel<n>:IMPedance
Syntax
:CHANnel<n>:IMPedance <impedance>
:CHANnel<n>:IMPedance?
Description
Set or query the input impedance of the specified analog channel. The default unit is Ω.
Parameter
Name Type Range Default
<n> Discrete {1|2} --
<type> Discrete {OMEG|FIFTy} OMEG
Explanation
OMEG: 1MΩ; FIFTy: 50Ω
Return Format
The query returns OMEG or FIFT.