Rigol MSO2000A Series

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-75
:CURSor:MANual
 :CURSor:MANual:TYPE
 :CURSor:MANual:SOURce
 :CURSor:MANual:TUNit
 :CURSor:MANual:VUNit
 :CURSor:MANual:CAX
 :CURSor:MANual:CBX
 :CURSor:MANual:CAY
 :CURSor:MANual:CBY
 :CURSor:MANual:AXValue?
 :CURSor:MANual:AYValue?
 :CURSor:MANual:BXValue?
 :CURSor:MANual:BYValue?
 :CURSor:MANual:XDELta?
 :CURSor:MANual:IXDelta?
 :CURSor:MANual:YDELta?
:CURSor:MANual:TYPE
Syntax
:CURSor:MANual:TYPE <type>
:CURSor:MANual:TYPE?
Description
Set or query the cursor type of manual cursor measurement.
Parameter
Name Type Range Default
<type> Discrete {TIME|AMPLitude} TIME
Explanation
 TIME: X cursors which are usually used to measure time parameters.
 AMPLitude: Y cursors which are usually used to measure voltage parameters.
Return Format
The query returns TIME or AMPL.