RIGOL 2 Command System
2-212 MSO2000A/DS2000A Programming Guide
:REFerence:VOFFset
Syntax
:REFerence:VOFFset <voffset>
:REFerence:VOFFset?
Description
Set or query the vertical offset of the current reference channel waveform. The unit is the same with that
of the current signal source.
Parameter
Name Type Range Default
<voffset> Integer -150 to +150 --
Note: When <voffset> is 0, the vertical position of the reference waveform is the same with that of the original
waveform. When the parameter increases or decreases by 1, the reference waveform moves upward or downward by
1/25*vertical scale of the original waveform relative to the vertical position of the original waveform.
Return Format
The query returns an integer.
To Next Page
Loading...
