Rigol MSO2000A Series

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-205
:RECall Commands
 :RECall:SETup
 :RECall:TRACe
 :RECall:WAVeform
:RECall:SETup
Syntax
:RECall:SETup <file_spec>
Description
Recall the setup file stored in the external memory.
Parameter
Name Type Range Default
<file_spec> ASCII string Refer to the Explanation --
Explanation
 Beforing recalling the setup file, use the
:SAVE:SETup[:STARt] command to store the corresponding
file into the external memory.
 <file_spec> includes the file storage directory and the filename with suffix. Its length cannot
exceeds 64 characters. Wherein, the storage directory can only be D:\.
Example
:RECall:SETup D:\123.stp /*Recall the setup file 123.stp stored in the D disk*/