Rigol MSO2000A Series

2 Command System RIGOL
MSO2000A/DS2000A Programming Guide
2-267
:TRIGger:MODE
Syntax
:TRIGger:MODE <mode>
:TRIGger:MODE?
Description
Set or query the trigger type.
Parameter
Name Type Range Default
<mode> Discrete
{EDGE|PULSe|RUNT|WIND|NEDG|SLOPe|VIDeo|PATTern|
DELay|TIMeout|DURATion|SHOLd|RS232|IIC|SPI|USB|CAN }
EDGE
Return Format
The query returns EDGE, PULS, RUNT, WIND, NEDG, SLOP, VID, PATT, DEL, TIM, DURAT, SHOL, RS232,
IIC, SPI, USB or CAN.
:TRIGger:NREJect
Syntax
:TRIGger:NREJect <bool>
:TRIGger:NREJect?
Description
Enable or disable noise rejection; or query the current status of noise rejection.
Parameter
Name Type Range Default
<bool> Bool {{0|OFF}|{1|ON}} 0|OFF
Return Format
The query returns 0 or 1.