Rigol MSO2000A Series Programming Guide

RIGOL 2 Command System
2-188 MSO2000A/DS2000A Programming Guide
:MEASure:VMAX
Syntax 1
:MEASure:VMAX <chan>
Description 1
Enable the amplitude maximum value measurement function of the specified channel.
Syntax 2
:MEASure:VMAX? <chan>
Description 2
Enable the amplitude maximum value measurement function of the specified channel and return the
measurement result.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Explanation
The unit is determined by the unit selected for the source channel (refer to the
:CHANnel<n>:UNITs
command).
Return Format
The query returns the measurement result in scientific notation.
Example
:MEASure:VMAX CHANnel1
:MEASure:VMAX? CHANnel1
You can use the following commands to query the statistic maximum, minimum, current value, average
and standard deviation of the amplitude maximum measurement values of the specified channel
waveform. Sending the following commands will enable the statistic function automatically.
 :MEASure:VMAX:SMAXimum?
 :MEASure:VMAX:SMINimum?
 :MEASure:VMAX:SCURrent?
 :MEASure:VMAX:SAVerage?
 :MEASure:VMAX:SDEViation?

Rigol MSO2000A Series Specifications

General

Brand	Rigol
Model	MSO2000A Series
Category	Test Equipment
Language	English