Rigol MSO2000A Series

RIGOL 2 Command System
2-76 MSO2000A/DS2000A Programming Guide
:CURSor:MANual:SOURce
Syntax
:CURSor:MANual:SOURce <source>
:CURSor:MANual:SOURce?
Description
Set or query the channel source of manual cursor measurement.
Parameter
Name Type Range Default
<source> Discrete {CHANnel1|CHANnel2|MATH|LA|NONE} CHANnel1
Note: Only channels currently enabled can be selected as the channel source.
Return Format
The query returns CHAN1, CHAN2, MATH, LA or NONE.
:CURSor:MANual:TUNit
Syntax
:CURSor:MANual:TUNit <unit>
:CURSor:MANual:TUNit?
Description
Set or query the horizontal unit in manual cursor measurement.
Parameter
Name Type Range Default
<unit> Discrete {SECond|HZ|PERCentage|DEGRee} SECond
Explanation
SECond: in the measurement results, A->X, B->X and △X are in “s” and 1/△X is in “Hz”.
HZ: in the measurement results, A->X, B->X and △X are in “Hz” and 1/△X is in “s”.
PERCentage: in the measurement results, A->X, B->X and △X are in “%”.
DEGRee: in the measurement results, A->X, B->X and △X are in “°”.
Return Format
The query returns SEC, HZ, PERC or DEGR.