Rigol MSO2000A Series Programming Guide

3 Programming Demos RIGOL
MSO2000A/DS2000A Programming Guide
3-9
Get the length of the effective waveform data.
7. Convert the character data into array format using the String To Byte Array, namely display the
waveform data on the Waveform Graph control and then remove the TMC data header using the
Array Subset function.
8. The complete program block diagram is as shown in the figure below.

Rigol MSO2000A Series Specifications

General

Brand	Rigol
Model	MSO2000A Series
Category	Test Equipment
Language	English