Communication: Monitoring Station
The Report Split menu contains parameters that enable the routing of specified events to
up to three Monitoring Station Receivers. (See Appendix A – Report Codes)
Reports Arming/Disarming (meaning Closings/Openings) events to the
Monitoring Station
⬧ Do not call (no report)
⬧ Send 1st: Reports Openings and Closings to MS 1
⬧ Send 2nd: Reports Openings and Closings to MS 2
⬧ Send 3rd: Reports Openings and Closings to MS 3
⬧ Send all: Reports Openings and Closings to the all defined MS
⬧ 1st Backup 2nd: Reports Openings and Closings to MS 1. If communication is
not established, calls MS 2
Reports urgent (alarm) events to the Central monitoring station
⬧ Do not call (no report)
⬧ Call 1st: Reports urgent events to MS 1
⬧ Call 2nd: Reports urgent events to MS 2
⬧ Call 3rd: Reports urgent events to MS 3
⬧ Call all: Reports urgent events to the all defined MS.
⬧ 1st Backup 2nd: Reports urgent events to MS 1. If communication is not
established, calls MS 2
Reports non-urgent events (troubles and test reports) to the MS
⬧ Do not call (no report)
⬧ Call 1st: Reports non-urgent events to MS 1
⬧ Call 2nd: Reports non-urgent events to MS 2
⬧ Call 3rd: Reports non-urgent events to MS 3
⬧ Call all: Reports non-urgent events to the all defined MS.
⬧ 1st Backup 2nd: Reports non-urgent events to MS 1. If communication is not
established, calls MS 2
To Next Page
Loading...
